Glue Devil SCREW IT! Just glue it - White 290ml

GLUEDEVIL SCREW IT! JUST GLUE IT is the ultimate combined building adhesive and sealant – based on hybrid polymer technology – with the most amazing strength to bond and seal virtually EVERYTHING to ANYTHING in any conditions (even underwater or in the rain!). SCREW IT! JUST GLUE IT offers almost limitless benefits as an adhesive and a sealant, while removing previous application barriers associated with conventional products. It combines the best features of acrylic sealers, polyurethanes and silicones into one amazing product! An excellent fixing adhesive that replaces nails, screws and other mechanical fixings.
 

Properties:

• Extremely strong adhesion
• Incredible instant tack (grab)
• Great primer-less adhesion
• Can be applied to wet surfaces
• Works underwater
• Easy single component application
• Environmentally friendly
• Solvent, silicone and isocyanate free
• Excellent UV resistance
• Resistant to weathering and ageing
• Paintable with all types of paints (including water-based paints)
• Bonds dissimilar substrates
   

Technical Information:

Chemical Base:           Silane Terminated Polymer

Specific gravity:          1,52 ± 0,03 g/cm3

(ASTM D 1045–86)

Tack free time:              approx. 5-10 min.

(25ºC and 50% R.H)

Shore Hardness:           50 ± 5

(ASTM D 53505)

Elongation at break (%):         > 300

(DIN 53504)

Tensile strength (MPa):          >1, 90

(DIN 53504)
 

Application Details:

Sealing and bonding in almost every application imaginable. The following are just some examples: Instant bonding and fixing of house numbers, signs, large panels, wallboards, skirting boards, dado rails, cornices, key holders, picture frames, cladding, electrical boxes, names plates, car bodies, caravans, small mirrors, sanitary fixtures, marble, granite, carpets, ceramic tiles, wooden flooring, cover strips, window sills, sealing of floor joints and much more.

Application Temperature:      +5 °C to +35 °C

Temperature Resistance:        -40 °C to +90 °C
 

GLUEDEVIL SCREW IT! JUST GLUE IT is suitable for mounting and pasting of materials such as metal, aluminium, glass, plastic, wood and concrete with each other (it is not recommended to use in PMMA and polycarbonate type materials and there is no adhesion on silicones and bituminous substrates.

It can be used for construction industry, both indoors and outdoors as an elastic adhesive;

• Sealing of building and construction elements
• Kitchen and bathroom sealing applications
• Roof constructions
• Sealing of natural stones
   

Resistance to chemicals:

Good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids

and alkalis. Poor resistance to aromatic solvents, concentrated acids, and chlorinated hydrocarbons.
 

Bonding time:

Maximum strength will be achieved after 24 hours.
 

Directions:

• The application surface must be clean, dry and free of dust, oil and grease.
• Apply adhesive in vertical/horizontal stripes with 10-15 cm distance in between to allow for air flow and bring the materials into position and press well to make sure that the thickness of the adhesive is minimum 2-3 mm.
   

Packaging:

290ml cartridge          00-SCREW6777

90ml tube                   50-SCREW688

Colours:

White
 

Storage and Shelf Life:

GLUEDEVIL SCREW IT! JUST GLUE IT has a shelf life of 9 months (the expiry date is shown on the packaging), when stored at a temperature between +5°C and +25°C in its original unopened packaging.
 

Caution:

• It is advisable to wear gloves
• Keep out of reach of children
• As this product is used outside our control, we cannot accept liability for any loss or damage whatsoever
• Not suitable for PP, PE and Teflon
   

Health and Safety:

For more information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing, physical, ecological, and toxicological and other safety related data.